Instructions to be used
1.Installed gravel cleaner,please keep the water level between the MAX and MIN,then strat switch.When the outlet can draw water,raise the gravel cleaner,let the head and outlet above the water.
2.Idle spin out of water can’t beyond one minute.
3.Batteries must be installed on the right way.
4.The collect dirt bag must be clean after gravel cleaning every time
Why can not pump
The cleaner pumping function is work by siphon effect.
Put the start water line which below the take care of into water when you use the cleaner and turn on the switch.
If the water level is in point of fact too low, you’ll be able to take out the No. 2/3/4 extension tube and pump directly by the No. 1 sand-washer mainframe.
Please be careful steer clear of over the water level above the guard line.
About the suction
You can remove the gravel cleaner when clean the fish manure，and pump by pipe directly
The main function of the Fish Tank Vacuum Cleaner is aquarium drainage,filter dirt and clean the fish tank
The cleaner install the battery to use.(the package contain the connector:3V 2A） Freely adjust the different lengths:62cm/73cm/100cm，suitable for both shallow and deep aquarium
Can clean gravel, siphon the fish excreta and other dirt out effectively without requiring a water change
Ideal for complete aquarium cleaning or quick spot maintenance and if truth be told continuous work within 20 minutes
High safety performance，only need 2 size alkaline battery.
Our delivery frequently earlier than Amazon estimated delivery time.